Thursday, June 7, 2012

Hexagon Hiccup

The centre panel of my little wall quilt is finished:


But it's not going to stay this way!

My original plan was to square up this centre panel by sewing straight borders over the wobbly edges, and then applique the borders.  However, there was a problem with that.

As I described earlier, I have been basting and stitching the hexagons in one step and with one length of thread.  This works great and I still love this method.  The catch, though, is that you cannot remove the basting without unravelling the whole thing.  Why would I want to remove the basting?  Because I want to open out the seam allowances to attach the borders.

I could just sew over the folded seam allowances, but I think that will add a lot of bulk, especially along the top and bottom, which will interfere with the applique.

I was explaining my problem to my parents and showed them the work, and they were amazed that I wanted to cover up the nice shapes of the hexagons at the top and bottom.  I realized they were right!  I have already modified the original pattern, so why not keep the hexagons whole and applique the centre panel on top of the borders?

So the half hexagons in the corners are definitely history, and I am also considering removing all the halves along the sides.  Plus, this will be great practice for my Botanic Roses quilt, because I have already decided to applique the centre to the borders on that quilt.

The funny thing is that as soon as I started to fill in all the half hexagons along the sides, something felt wrong.  Now I feel back on track.  But I don't think I would have understood the problem until I went a ways down the wrong path.  Live and learn!

Wednesday, June 6, 2012

Celtic Spring Progress

Yesterday I showed you where Celtic Spring stood a week ago before I took it out of the frame.  This is what I've managed to achieve with four or five days of steady stitching:


Taking it out of the frame has turned out to be very motivating!  It is SO much easier and more comfortable.  I am fairly strong despite my dodgy back, so I was able to hold the Q Snap frame for about three hours before my left wrist became tired.  Out of the frame I was able to sew for much longer.

It is also much easier to stitch accurately.  With the work in hand, it is easy to come up through the fabric in the right place because your left hand can help guide the needle. As I mentioned yesterday, I am still stab stitching the cross stitches, because my stitches just aren't as neat when I stitch entirely from the front of the work.

When I stitched the aida there was no difference between the stitches worked in hand or on the frame, but on the lightweight linen evenweave there IS a slight difference.  It is harder to get the two strands of floss to lie beside each other rather than overlapping.  If you look closely on the photo you can see the stitches on the skirt below the line are not quite as smooth.

But that is a price I am willing to pay, because everything else about it is better.  It also seems to put less stress on the gold metallic thread, so that actually looks better in the new part of the stitching.

The other challenge with this project is that there are a lot of beads throughout the entire work.  I couldn't imagine how I was going to bead the whole large piece in a frame. Now I don't have to worry about saving the beads to the end, I can alternate between beading and cross stitches to keep everything fresh.

Sometimes you will see someone's cross stitch that has been puckered or distorted because they worked it in hand.  I haven't noticed any problem with that.  The wrinkles in the photo are just from handling the linen.  It may be that because I am stab stitching rather than stitching entirely from the top it is easier to maintain the correct tension.  I am sure there are practiced stitchers who get beautiful results that way, but I am not there yet!  But I can say that I am retiring all my frames for the foreseeable future!

Tuesday, June 5, 2012

Cross Stitch Without a Frame

I am so, so far behind with my blog posts!  I have been busy but disorganized.  Now, though, I am going to start catching up!

I have been going through a cross stitch phase again recently.  Celtic Spring kind of ground to a halt around late February when I filled up my 11" x 17" Q Snap frame and debated the best way to proceed from there.  Up until a week ago it looked like this:


In the past I would have done a large project like this on a scroll frame.  However, when I discovered Q Snap frames I swore I would never go back to scroll frames.  Scroll frames are so heavy, and I am constantly either banging my arm or catching the thread on the knobs.  With my dodgy back I have to lean back in my chair, so I can't use a seat or floor frame comfortably.  This project does fit into a 17" x 20" Q Snap frame, but the frame was so big I couldn't fit my arm around it!  So as an interim measure I put it into this 11" x 17" frame which was easier to manage.

Once I started using the metallic gold thread and I realized how important it was to maintain the crinkles in the thread, I started to worry about what would happen to the gold thread when I had to move the frame over the already stitched areas of the work.  I thought about doing a test patch, but I never got around to it.  While I was dithering about that I decided to work on something easier:


This may well be the first cross stitch pattern I ever bought.  I bought it back in the mid 1990s from June Grigg herself.  She and her husband had come all the way up from Atlanta to Toronto to have a booth at the Creative Sewing & Needlework Festival, which is now called the Creativ Festival.  I remember because they were both very nice.  It seems to me that the festival used to be more fun back then, with a wider range of vendors.  It was before Christmas, and I think it was held in the old Automotive Building at the Ex.  The whole place was strung with white fairy lights above the vendor stalls.  My friend and I went up to the mezzanine where you could look out over the lights and the entire festival - it was quite a sight!

These patterns have always been reasonably high on my cross stitch bucket list, but when I had another look at the leaflet last fall I worried that the large flat areas of colour might be too boring.  Then I realized that sometimes easy is a good thing, so I went ahead and bought the materials.  Another tv project!  I put it into a small Q Snap frame.

What I discovered, though, was that stitching the 18 count aida actually took more concentration than I wanted to give it.  For some reason, when I did my Kittens project on 18 count last fall I didn't notice the concentration needed to make the stitches, probably because I was already concentrating a lot on the counting.  The whole thing was feeling awkward, and I was remembering how much easier my redwork became when I took it out of the hoop, so I took the plunge.


The very dark brown and the green parts here are cross stitches, and the mahogany on the left and pale yellow and green on the right are half cross stitches.  I did the half crosses entirely from the top of the fabric, going down and up in one motion.  With the cross stitches I found it was better to still do stab stitches even with the fabric in hand.  When you look at the mahogany part especially you can see that the stitches are not too even.  However, it is so much faster that I will probably continue that way!  With the cross stitches you cannot see the difference at all between the stitches worked on the frame and the stitches worked in hand.

I have gone on for long enough now, so I'll show you how this worked on the linen evenweave of Celtic Spring tomorrow!


Related Posts:

Related Posts Plugin for WordPress, Blogger...