Epic Fail

Many of you know by now that I am perfectly willing to share my mistakes as well as my successes. I don't think any blogger sits around producing perfect work on the first try. I certainly don't! So here's what I've been working on recently. I'm over 20 hours in on this. Doesn't look too bad at first glance, does it?

This is where I found myself today:

Inside the circle is a gap of five stitches that is supposed to be a gap of one stitch. Don't kid yourself, this is a serious mistake. As far as I can tell, I counted wrong on the very first row I stitched. How did I do that? I stitched the extra four stitches on the chart twice!!

I'm an experienced cross stitcher, I know how these charts are supposed to work. I do remember that the day I started this project I knew I was a little tired, so I chose something that I thought would be easy to work on.

The worst thing is that I kept having nagging doubts while I was stitching, and I ignored them. I started my Août sampler in the wrong place, and while I was stitching that I kept remembering previous times I had counted wrong. Sure enough, the next time I pulled it out I could see it was wrong, and it was an easy fix. The same thing happened with this project, but I said to myself, "surely I am not wrong again!" Argh. I am all about trusting your gut and listening to your inner guidance no matter what, so believe me, this is doubly humiliating for me. A good lesson, though!

What now? I have to think about it. I could unpick the entire right side, which has less done on it so far. However, the whole piece will end up very close to the left edge of the fabric, which may make blocking and framing it more challenging down the road. The kit fabric wasn't very large to start with. Plus, now there is going to be a thread issue. The threads appear to be DMC colours, but the quality is not the same as the individual skeins you buy retail.

I could just throw it out and call it bad luck all around, but this is just one of a set of four, and I've actually really been enjoying it up until now.

Probably I'll buy some new fabric, replace the missing threads, and start over. I should be able to blend together the new thread and the old so it doesn't show. And I'm not happy with the quality of the kit fabric anyway - the piece is pretty small and there is an awkward flaw right in the middle of an open section of the design. You can view the chart for this project here. I would recommend buying just the chart, rather than the whole kit. Then you can use your own better quality fabric and threads.

Now I'm wondering if this is a good opportunity to upgrade the project to a nice evenweave and better threads. I'll let you know what I decide. Maybe everything has worked out for the best after all!

Compass Centre

Look what happens when I manage to avoid turning on the computer in the morning!

I managed the whole thing today. Didn't get the laundry done though!

I haven't shown this project since last May, when I bought all the fabrics. The pattern is Judy Niemeyer's Prairie Star, which is the same pattern as her Hawaiian Star, only a different colourway. I have decided to call it Riviera Star, since many of the fabrics are from the Riviera II collection from Connecting Threads. It's almost sold out now.

Here's my colourway again:

The background cream fabric with the red flowers is darker overall than I expected, but I think it still looks ok.

The foundations are printed on newsprint. This worried me when I first opened the box, because it feels very fragile and easy to tear. So far, though, working with the smaller centre sections at least, it has been pretty good. It's easy to fold accurately, and it does tear away easily. I suspect, though, that those large outer sections are going to be a challenge!

But anyway, it was a fun day today. I love paper piecing, and it's always interesting to try out a new pattern!

Deconstruction

This is an old UFO that I started in 2010. Recently I've been tossing around ways to rework it, so I dug it out again today. It had a variety of problems:

• The fabric wasn't washed
• The HSTs were not cut accurately
• The design didn't use its feature fabric to the best advantage. These blocks were so bold, they drowned out the border print.

Because the HSTs were inaccurate, the blocks were a bit of a mess too. The red one is not too bad, but you can see the yellow one is worse:

So, I have a new design, and my plan is to take these 8" blocks apart down to their square units, wash them all in lingerie bags in the machine, and then square them up to make 6" blocks and re-use them. Fortunately, there are not that many finished blocks to deconstruct.

The seam ripper is not usually my friend, but this time I am enjoying it because I am interested to see how my plan will turn out.

Think it will work? I'll let you know!