The day after my last post, I did take a run at the applique on my new project L'Herbier, and I was quite pleased with the result, but I didn't take any photos of the process. Yesterday I did a second one, and I think I got carried away with the photos! But, I have never seen this exact combination of techniques anywhere else, so I might as well show all the details. Be warned, this will be a long post!
First, why am I going to all this trouble? There were quite a few considerations:
- Some of the embroidery that will go in the circles is quite heavy, with beads, etc. So, a backing is required.
- I decided on a muslin backing because a) I prefer not to use a fusible stabilizer in a piece that I want to last a long time, and b) with my chemical sensitivities I need to wash everything before I work with it, so nothing with a lot of starch or sizing would work.
- The kit came with just the bare minimum of fabrics for the circles, and then I had to wash it as well. So I really couldn't do the embroidery without sewing it into the blocks first, because the pieces would be too small to hoop, and finishing the edges to prevent fraying would leave them even smaller.
These light card 5" circles from Paper Pieces, one of my favourite stores, are what made this whole idea come together. Although the circles in the pattern are about 5.5", I reduced them slightly to 5" so that I would have a comfortable seam allowance to work with.
To help centre the circle on the four patch blocks, I started by carefully pinching the four compass points on the circle.
To start the basting, I took at tack stitch at one of the folds in the paper, and then ran a loose running stitch through both layers of fabric, but not through the paper, about 3/16" outside the edge of the circle. I made a second tack through the paper at the next fold, and pulled the running stitch tight to gather it around the paper.
Now I was finally able to sew! I was careful to catch both the top fabric and the muslin in the applique stitches. I admit it was heavy going!
I used 50 wt cotton sewing thread and a Clover embroidery needle for the applique. I have been using an embroidery needle for all my heavier English Paper Piecing, such as the Best Friends Forever blocks. I find it is easier to thread, easier to hold, and sharp and strong enough to pierce several layers of fabric.
Now, what do you think I should do with these?: